|
|
Benefits
|
|
Increase Production
Let one person do
the job of two! Speeds up production.
Save Time & Money
Less labor, Less
cost per bar. Allows one person to lift that heavy mold.
Increase Profit
Less labor and time means less cost per
bar-Equals More Profit!
Custom Designed
Designed to attach
to our Air Soap Cutter.
Built to Last
Built tough to withstand years of use.
|
Related Products
|
|
Air Soap Cutter
Manual Soap Cutter
Pot Tipper
Oil Heaters |
|
|
Printer-Friendly Version |
|
|
Click Images to Enlarge
Shown mounted to
Our Air Soap Cutter
with Soap Mold
Note:
Tongs have been
replaced with
Wire Rope Lanyards
|
|
Shown mounted to
Our Air Cutter
with
Pro Mold
Note:
Tongs have been
replaced with
Wire Rope Lanyards
|
|
Manual
Cutter Pro Mold
shown
with
Wire
Rope Lanyards
in
place of Tongs |
|
Air Soap Cutter - Easy Hoist System
|
 |
|
Model: ACEHS |
Air Soap Cutter-Easy Hoist System |
$1,356.00 ea
|
 |
|
 |
|
|
How are you going to lift that heavy mold? No problem. Our Easy Hoist System works in tandem with the Model
CutAir Air Soap Cutter…. in fact it attaches right to our Air Soap Cutter.
Description
 |
Will lift up to 440 lbs (200Kg). Just a touch of a button to operate. The average Air Soap Cutter Mold when full is about 140 lbs (63.5Kg). |
|
|
Built tough to withstand years of use. |
|
|
Easy to Use, Our
Easy Hoist System uses a set of Wire Rope Lanyards
to lift the mold. These are stainless steel
cables, with loops that loop securely at the four
lift points (top threaded rods), and are then
hooked to the hoist block for lifting. |
|
|
The hoist itself is mounted to a ball bearing, four wheel trolley, set in a heavy duty track above the Air Soap Cutter. This allows you to easily move and place the mold onto our rolling Air Soap Cutter table. |
|
|
Easy to assemble and, The Easy Hoist System is Easy to Assemble; about 30 to 45 minutes for one person. No special tools required. |
Note:
|
|
Tongs are no longer used, we will be
replacing the Easy Hoist Picture soon. See description above. |
Specifications
|
|
All steel construction. 2” X 2” (5cm X 5cm) steel tubing and 2” X 2.5” (5cm X 6.4cm) Track. |
|
|
Protected with a
tough, baked on powder coat, enamel finish. |
|
|
440 lb (200Kg) lift capacity. |
|
|
40 ft. (12.2m) of 1/8” (.32cm) carbon steel cable. 5 1/2 ft (1.7m) Remote control cable |
|
|
110 volts, 60hz, 4.5 amps. |
|
|
All hardware is included. |
|
|
Can ship via FedEx or UPS, two cartons, total weight approx. 80 lbs (36Kg) |
Note:
|
|
Some systems may require a minor attachment to a wall or counter weight. |
|
|
|
Manual Soap Cutter
Easy Hoist System
Note:
Tongs have been
replaced with
Wire Rope Lanyards
|
|
Manual
Cutter Mold
shown
with
Wire
Rope Lanyards
in
place of Tongs |
|
|
Model: MCEHS |
Manual Cutter-Easy Hoist System |
$454.00 ea
|
|
|
|
|
|
Need an easier way to hoist that soap mold onto your cutting table? A simple solution is to install a Manual Soap Cutter Easy Hoist System. After that it is as easy as pushing a button.
Description
|
|
Will lift up to 440 lbs (200Kg). Just a touch of a button to operate. The average Manual Soap Cutter Mold when full is about 120 lbs (54.5Kg). |
|
|
Built tough to withstand years of use. |
|
|
Our MCEHS, Easy Hoist
System uses a set of wire rope Lanyards to lift the mold. These are
stainless steel cables, with loops that loop securely at the four
lift points (top threaded rods), and are then hooked to the hoist
block for lifting. |
|
|
The hoist itself is mounted to a ball bearing, four wheel trolley, set in a heavy duty track above the Cutter table. This allows you to easily move and place the mold next to your Manual
Soap Cutter. |
|
|
The Manual
Soap Cutter Easy Hoist System is easy to assemble; The most important thing is a good solid mount to the structure above. We can assist in any mounting problems or special considerations. |
Note:
|
|
Tongs are no longer used, we will be
replacing the Easy Hoist Picture soon. See description above. |
Specifications
|
|
All steel construction. 2” X 2.5” (5cm X 6.4cm) Track. |
|
|
Protected with a
tough, baked on powder coat, enamel finish. |
|
|
440 lb (200Kg) lift capacity. |
|
|
40 ft. (12.2m) of 1/8” (.32cm) carbon steel cable. 5 1/2 ft (1.7m) Remote control cable |
|
|
110 volts, 60hz, 4.5 amps. |
|
|
All hardware is included. Track mounting hardware is not included, this varies with structure. |
|
|
Can ship via FedEx or UPS, two cartons, total weight approx. 40 lbs (18Kg) |
|
|
Call for more details. We will be glad to help you with your system design. |
Note:
|
|
The Manual Soap Cutter Hoist system requires a secure mounting, either to the structure above or a freestanding
support. |
|
|
|
|