The
HANDcraft SR Labeler, will handle round containers up
to 8" in diameter. You can expect production rates
of 15 to 20 units per minute (900 to 1200 per hour),
within a short time of using the Handcraft Labeler.
Description:
Easy
to use and quick to set-up. Perfect for any
round container from .15 ounce (4.4ml) lip balm
tubes to gallon jugs.
The
HANDcraft SR Labeler can apply pressure sensitive
labels to any container or package, as small as
a 1/2" to as large as 8" (13mm to 200mm) in
diameter.
The
HANDcraft SR Labeler has a small foot print,
only 12" (30cm) wide x 24" (61cm) long, but it
is certainly big on what it can accomplish.
Applies pressure sensitive labels made of
plastic, paper, Mylar, etc.
Will
handle label rolls up to 6 1/2" (165mm) in width
and 12" (300mm) in diameter.
Uses
standard, 3" (76mm) core label rolls, which can
be Die Cut or Butt Cut.
Capable of applying single labels or front and
back labels.
Application speeds for single labels, 15 to
20 per minute, for front and back labels, 6
to 8 per minute.
We have
customized our labelers for many different
applications, such as, Syringes, Tins, Hard
Plastic Boxes and Books, Soap, Test Tubes and many
other odd applications. Doesn’t hurt to ask. Click
here to contact us. (Contact Sales)
Specifications:
Label
dimensions, can range from, 3/4" to 6 1/2" (19mm
to 165mm) in width.
The
maximum roll width, with backing, is 6 1/2"
(165mm). This is called, “Web Width” and is also
the approximate label height, as it goes onto
the container.
The
Roll Core Size is, 3" (76mm) in diameter. This
is the inside diameter of the paper core that
the labels are wound onto.
The
maximum overall, Label Roll Diameter is, 12"
(300mm).
The
industry standard of, 1/8” to 3/16” (3mm to 5mm)
between labels works best.
Construction ¼ “ milled Alcoa® aluminum on the
main frame. Other materials include
poly-propylene, acrylic, phenolic, brass,
stainless steel and anodized aluminum.
Please Note:
If
you are in doubt about a container or label it
is best to send a sample to us, to verify.
Paper
backing is best but the HANDcraft Labeler will
work with any backing.
Label
Instructions for your Printer:
Labels unwind from the bottom....Under - Over.
Label
direction....Your printer will understand the
standard label direction numbers below. You only
need to tell them which number you prefer and
that the labeler unwinds from the bottom.
#4: is best direction for a right handed
person and a label running parallel to
bottle. Bottom of bottle to left, neck to
right. Left edge of label leading.
#3: is best direction for a left handed
person and a label running parallel to
bottle. Bottom of bottle to right, neck to
left, Right edge of label leading.
#2: is best direction for a right handed
person and a label running right angles to
container as in a lip balm tube, Bottom of
tube to left, top to right. Top edge of
label leading.
#1: is best direction for a left handed
person and a label running right angles to
container as in a lip balm tube, Bottom of
tube to right, top to left. Bottom edge of
label leading.
View Video of the
HANDcraft Universal
Bottle Labeler
in Action!
Click Image To Enlarge
Universal Bottle Labeler
Universal Bottle Labeler
Label
Position Chart
(Refer to the
"Label Instructions
for your Printer" section)
Label
Feed Diagram
HANDcraft SR Labeler
Check out our
Color Label Printer
Print your own
Full Color Labels
HANDcraft Universal Bottle Labeler
Model: PLTlab
HANDcraft Universal Bottle Labeler
(See Note Below)
$2,990.00 ea
Note:
These items are made to order therefore cannot
be added to our cart, for Bottle Labeler orders,
Contact Us.
This labeler does it
all….Tapered Bottles, Square Bottles, Oval Bottles,
Round Bottles, Front and Back Labels; just about
everything. And the best part, it is easy to setup
and use.
Description:
Easy to use and quick
to set-up.
Works with Lip Balm
Tubes to Gallon Jugs.
This handy label
applicator will do Tapered Bottles, Square
Bottles, Oval Bottles and Round Bottles. Send us
your container if in doubt.
Works perfectly with
labels printed by our Primera Label Printer.
The HANDcraft
Universal Labeler can apply pressure sensitive
labels to any container, as small as a 1/2" to as
large as 8" (13mm to 200mm) in diameter.
The HANDcraft
Universal Labeler has a small foot print, only 12"
(30cm) wide x 24" (61cm) long, but it is certainly
“BIG” on what it can accomplish.
Applies pressure
sensitive labels, made of plastic, paper, Mylar,
etc.
Will handle label
rolls up to 6 1/2" (165mm) in width and 12"
(300mm) in diameter.
Uses standard, 3"
(76mm) core label rolls, which can be Die Cut or
Butt Cut.
Capable of applying
single labels or front and back labels.
Label Applicator
speeds for single labels, 15 to 20 per minute, for
front and back labels, 6 to 8 per minute.
We have customized our
labelers for many different applications, such as,
Syringes, Tins, Hard Plastic Boxes and Books,
Soap, Test Tubes and many other odd applications.
Doesn’t hurt to ask. Click here to contact us.
(Contact Sales)
Specifications:
Label dimensions, can
range from, 3/4" to 6 1/2" (19mm to 165mm) in
width.
The maximum roll
width, with backing, is 6 1/2" (165mm). This is
called, “Web Width” and is also the approximate
label height, as it goes onto the container.
The Roll Core Size is,
3" (76mm) in diameter. This is the inside diameter
of the paper core that the labels are wound onto.
The maximum overall,
Label Roll Diameter is, 12" (300mm).
The industry standard
of, 1/8” to 3/16” (3mm to 5mm) between labels
works best.
Construction ¼ “
milled Alcoa® aluminum on the main frame. Other
materials include poly-propylene, acrylic,
phenolic, brass, stainless steel and anodized
aluminum.
Please
Note:
If you are in doubt about a container or
label it is best to send a sample to us, to
verify.
Paper backing is best but the HANDcraft
Junior Labeler will work with any backing.
Label
Instructions for your Printer (Label Supplier):
For square and oval bottles, using the "Tamp Set
Up" as shown in the top picture, ask your
Printer for Label Position #1.
Labels unwind from the bottom....Under - Over.
Label
direction....Your printer will understand the
standard label direction numbers below. You only
need to tell them which number you prefer and
that the labeler unwinds from the bottom.
#4: is best direction for a right handed
person and a label running parallel to
bottle. Bottom of bottle to left, neck to
right. Left edge of label leading.
#3: is best direction for a left handed
person and a label running parallel to
bottle. Bottom of bottle to right, neck to
left, Right edge of label leading.
#2: is best direction for a right handed
person and a label running right angles to
container as in a lip balm tube, Bottom of
tube to left, top to right. Top edge of
label leading.
#1: is best direction for a left handed
person and a label running right angles to
container as in a lip balm tube, Bottom of
tube to right, top to left. Bottom edge of
label leading.
View Video of the
HANDcraft JR Labeler
in Action!
Click Image To Enlarge
HANDcraft JR Labeler
by
Willow Way
Label
Position Chart
(Refer to the
"Label Instructions
for your Printer" section)
Label
Feed Diagram
HANDcraft SR Labeler
Check out our
Color Label Printer
Print your own
Full Color Labels
Check Out Other
Attachments
for the
HANDcraft JR
Bottle Labeler
Below!
HANDcraft JR Bottle Labeler
Model:
LAB2
HANDcraft JR Labeler
$1,195.00 ea
The
HANDcraft Junior Labeler, may sound light weight but
it is definitely not. He is just smaller in stature.
Junior can handle round containers up to 4" (102mm)
in diameter and you can expect production rates of
15 to 20 units per minute (900 to 1200 per hour).
Description:
Easy to use and quick to set-up. Perfect for
any round container from .15 ounce (4.4ml)
lip balm tubes to quart and liter bottles.
The HANDcraft Junior Labeler, can apply
pressure sensitive labels to any container
or package, as small as a 1/2" to as large
as 4" (13mm to 102mm) in diameter.
The HANDcraft Junior Labeler has a small
foot print, only 11" (28cm) x 18" (46cm)
long, but it is certainly big on what it can
accomplish.
Applies pressure sensitive labels made of
plastic, paper, Mylar, etc.
Will handle label rolls up to 5" (127mm) in
width and 8" (203mm) in diameter.
Uses standard, 3" (76mm) core label rolls,
which can be Die Cut or Butt Cut.
Also capable of applying front and back
labels.
Application speeds for single labels, 15 to
20 per minute, for front and back labels, 6
to 8 per minute.
We have customized our labelers for many
different applications, such as, Syringes,
Tins, Hard Plastic Boxes and Books, Soap,
Test Tubes and many other odd applications.
Doesn’t hurt to ask. Click here to contact
us. (Contact Sales)
Specifications:
Label dimensions, can range from, 1/2" to 5"
(13mm to 127mm) in width.
The maximum roll width, with backing, is 5"
(127mm). This is called, “Web Width” and is
also the approximate label height, as it
goes onto the container.
The Roll Core Size is, 3" (76mm) in
diameter. This is the inside diameter of the
paper core that the labels are wound onto.
The maximum overall, Label Roll Diameter is,
8" (203mm).
The industry standard of, 1/8” to 3/16” (3mm
to 5mm) between labels works best.
Construction; 12 gauge, 50-52, Alcoa®
aluminum unibody construction on main body.
Other materials include polypropylene /
acrylic / phenolic / brass/ stainless steel.
Please
Note:
If you are in doubt about a container or
label it is best to send a sample to us, to
verify.
Paper backing is best but the HANDcraft
Junior Labeler will work with any backing.
Label
Instructions for your Printer:
Labels unwind from the bottom....Under - Over.
Label
direction....Your printer will understand the
standard label direction numbers below. You only
need to tell them which number you prefer and
that the labeler unwinds from the bottom.
#4: is best direction for a right handed
person and a label running parallel to
bottle. Bottom of bottle to left, neck to
right. Left edge of label leading.
#3: is best direction for a left handed
person and a label running parallel to
bottle. Bottom of bottle to right, neck to
left, Right edge of label leading.
#2: is best direction for a right handed
person and a label running right angles to
container as in a lip balm tube, Bottom of
tube to left, top to right. Top edge of
label leading.
#1: is best direction for a left handed
person and a label running right angles to
container as in a lip balm tube, Bottom of
tube to right, top to left. Bottom edge of
label leading.
Benefits
Increase Production
You should expect
production rates of about 15-20 units per minute (900-1200 per hour)
with experience.
Save Time & Money
Less labor, Less cost per
bottle. Label thousands
of bottles a day with one person!
Increase Profit
Less labor and time means less cost per
bottle-Equals More Profit!
Versatile
Label dimensions, can
range from, 1/2" to 5" (13mm to 127mm) in width.
Applies pressure
sensitive labels made of plastic, paper, Mylar, etc.
Label any
round tube, vial or container, as small as ¼” (7mm).
This easy to setup attachment, converts our Junior
Labeler into the perfect Lip Balm Labeler.
Description:
Ideal
for labeling tiny containers from ¼” (7mm) to 1
½” (38mm).
Easy
setup that only takes a few minutes.
Works
great with our Safety Seal, Lip Balm Labels.
Click Images To Enlarge
HANDcraft JR Labeler
Attachment for curved
and straight containers
HANDcraft JR Bottle Labeler -
Attachment for Curved and Straight containers
Model: LAB2sc
Attachment for curved and straight containers
for JR Labeler
$384.00 ea
Label most Curved and Straight
containers with this easy to use attachment.
Click Image To Enlarge
Pro Bottle Labeler
Label
Position Chart
(Refer to the
"Label Instructions
for your Printer" section)
Check out our
Color Label Printer
Print your own
Full Color Labels
Willow Way Pro Bottle Labeler
Model: PROLAB
Willow Way Pro Bottle Labeler
(See Note Below)
$2,780.00 ea
Note:
These items are made to order therefore cannot
be added to our cart, for Bottle Labeler orders,
Contact Us.
Willow Way Pro Bottle Labeler will handle round containers up to 7” in diameter. You should expect production rates of about 7-8 per minute (420 per hour) starting out and with experience up to 15 or more (900 per hour) with experience.
Description:
Bench Top semi-automatic labeler and dispenser of pressure sensitive labels
Container diameter can range from 3/4" to 7" (19mm to 178mm)
Can be set up to do multiple size containers and labels.
Applies pressure sensitive labels made of plastic, paper,
Mylar, etc., to round containers and packages.
Foot switch initiates each single cycle label application. Up to 15 label applications can be completed per minute.
Labels can be Die Cut or Butt Cut.
Specifications:
Label dimensions can range from, 1/2" to 5" (13mm to 127mm) in width and from 1 1/4" to 15" (32mm to 381mm) in length.
The maximum width with backing for the label, this is called, “Web Width”, is 5" (127mm)
The Roll Core Size is 3" (76mm) in diameter
The maximum Roll Diameter is 10" (254mm) with a 3" (76mm) web width, and 8" (203mm) maximum with a 5" (127) web width.
Please Note:
If you are in doubt about a container or label it is best to send a sample to us, to verify.
It is important to have a good paper backing for the labels. This will make application much easier for the labeler. The thicker the backing the better, no serrated backing, that may separate or tear easily.
Avoid backing with Mylar or plastic.
Benefits
Increase Production
You should expect
production rates of about 7-8 per minute (420 per hour) starting
out and with experience up to 15 or more (900 per hour) with
experience.
Save Time & Money
Less labor, Less cost per
bottle. Label thousands
of bottles a day with one person!
Increase Profit
Less labor and time means less cost per
bottle-Equals More Profit!
Versatile
Label dimensions can range from, 1/2" to 5" (13mm to 127mm) in width and from 1 1/4" to 15" (32mm to 381mm) in length.
Container diameter can range from 3/4" to 7" (19mm to 178mm)
The Safety Seal covers, ¼” (21mm) of the top and is easily
removed with a twist of the wrist.
You may wonder if these have to be used in our printer….the
answer is, no. You could actually set up and run 3 or 4 at a time in
a regular printer. They may not be water resistant due to the ink
you are using and there is going to be some alignment issues with
your printer. Sorry no help on this but your printers help menu may
have some answers.
Model: LBlab - Lip Balm Label with Safety Seal
- 1,200 Labels Per Roll
* All specials are for a limited time only. Offers cannot be
combined with any other discount, offer, promotion or special
incentive program and are not valid on: (a) prior purchases, (b)
prior quotes or offers. Void where prohibited.
Prices are in U.S. dollars (USD). All prices and product
availability subject to change without notice. Unless noted, prices
do not include shipping and applicable sales taxes.
Please call or e-mail us with any questions or to place an order.
